SucceX-D F7 Stack (F7+60A ESC) for DJI Air Unit

iFlight Innovations

  • $118.99
  • Save 0%
Shipping calculated at checkout.


  • DRONE.PARTS GUARANTEED DELIVERY
    Order not on time? We've got you covered.
    Why Drone.Parts Store
  • Earn 11899 DronePoints

PRODUCT DESCRIPTION

The SucceX-D F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things as simple as possible, we have included a connector specifically for the DJI air unit, so installation should be a breeze. In addition, we add the popular and reliable USB Type-C instead of Micro USB which makes the connection easily.

Features

• Universal USB Type C connector instead of micro USB

• Plug-and-Play. No need to solder tiny wires.)

• Supports BLHeli pass-through for easy ESC upgrade and configuration.

• Designed to support DJI Digital FPV.

SucceX-D F7 TwinG  SPECS:

- MCU:216MHz STM32F722RET6

- Gyro: 2x ICM20689

- Baro:YES

- Betaflight OSD:YES

- Blackbox: 32MB

- 5 x Uarts

- 8 x Motor outputs

- 8 pin 4in1 ESC port

- 4-pin VTX connector

- Betaflight Firmware:betaflight_4.0.5_STM32F7X2.hex

- CLI config:IFLIGHTF7_TWIN_G.config

Physical 

- Mounting hole:30.5*30.5mm,φ4mm with Grommets φ3mm 

- Size:36*36mm 

- Weight:7.5g 

SucceX 60A BLHeli_32 4-in-1 ESC

Features:

- 8 layers single-board stacking PCB board;

- 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;

- 32bit FO51K86 MCU,48mHz running speed;

- TDK MLCC Low ESR ceramic capacitors;

- Top grade metal MOSFET;

- Rational layout, countersunk holes on extended motor soldering pad enable each layer board can be powered.

Specification:

- Dimension:43x39mm

- Mounting Holes: 30.5*30.5mm/Φ4mm

- Weight: 13.4g

- Supports 2-6S lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware

- Current sensor: Yes

- BEC: No

- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.

- Target: iFlight-BL32-4 in 1

Package included:

-SucceX-D F7 TwinG FC

-SucceX 60A BLHeli_32 4-in-1 ESC