iFlight SucceX F4 V2 Mini Flight Controller 2-6S STM32 F405 MCU OSD MPU6000 5V/3A 20x20mm

iFlight SucceX F4 V2 Mini Flight Controller 2-6S STM32 F405 MCU OSD MPU6000 5V/3A 20x20mm

Drone.Parts Store

  • $27.99
Shipping calculated at checkout.


  • DRONE.PARTS GUARANTEED DELIVERY
    Order not on time? We've got you covered.
    Why Drone.Parts Store
  • Earn 2799 DronePoints

 iFlight SucceX F4 V2 Mini Flight Controller 2-6S STM32 F405 MCU OSD MPU6000 5V/3A 20x20mm 

Note: This flight controller only compatible with SucceX Mini 35A 2-6S ESC. It is not with other extra ports for others ESC board.

PRODUCT DESCRIPTION

The new released SucceX Mini F4 flight controller has been optimized overall. The main soldering port has been upgraded to terminal plugs, which is convenient for pilots to assemble and disassemble. The F405 MUC equipped with the MPU6000 gyroscope is optimized for better flight performance. programmable RGB LED interface has been built-in for external LED to set LED color, function, and status. The built-in OSD chip helps to monitor the status of the flight data any time, smartaudio function is available;
 

Specifications:

SucceX mini F4 V2.0 Flight Controller:

- MCU: 100MHz STM32F450

- IMU: MPU6000 gyro/accelerometer (SPI)

- Integrated LC Filter

- Input Voltage: 2-6S Lipo

- OSD: BetaFlight OSD w/ AT7456E chip

- BEC Output: 5V@3A

- Size: 26x26mm board, 20mm mounting holes (M2)

- VCP, UART

- WS2812 Led Strip: Yes

- Beeper: For active 5V buzzer

- SBUS input: Yes

- Target: OmnibusF4SD

- Default firmware: Betaflight V3.5.3 ( V3.5.4 or higher version does not support current meter yet)

 

Features:

* STM32 F405 MCU FC w/OSD, integrated MPU6000 accelerometer and gyro;

* Plug-in connection, pin header design, easy to install and disassemble;

* Built-in programmable RGB LED interface

* Compact size 26*26mm

* Super-lightweight xxg
 

Functions:

- Compatible with SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM receivers etc;

- A LED strip signal output port to adjust the color & flash mode of the LED strip via the FC;

- Volt/Amp monitoring port to check the battery voltage ( VBAT+ port ) and current (CRT port) (extra current meter needed);

- Buzzer output port allows to connect external buzzer(s) to the FC for warning or informing the flight status;

- Support Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200.
 

Package included:

- 1 x SucceX mini F4 V2 Flight Controller 

- 1 x Cable Set