Menu
Cart 0

Aomway TX003 5.8G 64CH 0mw/25mw/100mw/200mw/400/600mw Smart Audio Pitmode FPV Transmitter VTX

  • $19.99

  • DRONE.PARTS GUARANTEED DELIVERY
    Order not on time? We've got you covered.
    Why Drone.Parts Store
  • Get it on or before by choosing FREE China (7-20) at checkout.
    Want it faster? Get it on or before by choosing China (5-8) at checkout.
    All shipping options are trackable
  • Earn 1999 DronePoints

  • In Stock


Aomway TX003 5.8G 64CH 0mw/25mw/100mw/200mw/400/600mw Smart Audio Pitmode FPV Transmitter VTX
Aomway TX003 5.8G 64CH 0mw/25mw/100mw/200mw/400/600mw Smart Audio Pitmode FPV Transmitter VTX 
 

Features
Suppourt Smartaudio and Pitmode ,power and frequency can be adjusted by BetaFlight 
Can be controlled by remote control transmitter 
Anti-interference, support more than 8 drones flying at the same time
0mw/25mw/100mw/200mw/400mw/600mw 5 levels power switchable .Output is stable
Long transmission distance and stable signal,≥0.5km@25mW ,≥0.8km@100mW . ≥1km@200mW(original antenna) 
Stronger power filter can provide the high-quaility real-time image when the drone in full throttle. No snowscreen or any striped image etc..
64CH including 8 race frequencies in the E Band which are used without interference at the same time.
Frequency is locked fast, won't intefere the signal of others
Support NTSC and PAL
Wide voltage, low consumption
2 Working modes, CE mode and normal mode
 
Specification
  modulate Wideband FM modulate  
  Video Format NTSC/PAL  
  characteristics Value Units   characteristics Value Units
    MIN. Typ. Max.       MIN. Typ. Max.  
1 Output
impedance
  50   ohm 7 Video input
level
0.8 1.0 1.2 Vp-p
2 Output Power 22 23 28 dBm 8 Audio input
level
0.5 ... 2.0 Vp-p
3 VCC-IN 7 12 24 V 9 Audio input
impedance
... 10k ... ohm
4 current@12V@
200mw
160 170 180 mA 10 weight ... 7.3 ... g
5 Video band
width
0 ... 8 Mhz 11 Antenna
connecor
MMCX
6 Audio ... 6.5 ... Mhz 12 dimensions 26mm×20mm×8mm

 
Operation
Power and frequency can be adjusted by BF firmware. The Pitmode is in 0mW, used for setting in short distance
 
CE mode& Normal mode. (long press the button for 10s, it will switch between CE and normal mode once.)
In CE mode, the Smart Audio stops working. All CH LEDs flash in blue. Power output locked in 25mW, only 5 channels works : CH1:5725,CH2:5765,
CH3:5800,CH4:5843,CH5:5866MH , and channels only can be switched by button.
 
Button Control :  
Frequency Adjustment : Short prss to change from CH1- CH8
Band Selection : Long press 2s (Fr blue LED flash) into Band Select mode, then short press to change FR(A-H)
Power Switch : Long press 10s(LED shows as follow) into power mode, short press to switch the power  from 25mw/100mw/200mw/400/600mw
Indicator  25mw 100mw 200mw 400mw 600mw Defect
 FR ○○● ○●○ ● ○○ ○ ●● ●●●  
CH ○○● ○●○ ● ○○ ○ ●● ●●●  
Power Flash 1 time
Stop 3s
Flash 2 times
Stop 3s
Flash 3 times
Stop 3s
Flash 4 times
Stop 3s
Flash 5 times
Stop 3s
 
solid on

Notice : When use BF OSD to adjust the parameter, be noted that there are only 40CH available in FC, the other frequencies(Band F/G/H) must be adjusted by manual.

Package Inluded
1 x TX003 Transmitter
1 x RHCP 4-Leaf Antenna
1 x Molex Pico 1.25mm 6P to 4P AV Cable