Lumenier QAV210 CHARPU Edition Carbon Fiber FPV Quadcopter – Drone.Parts Store
Menu
Cart 0

Lumenier QAV210 CHARPU Edition Carbon Fiber FPV Quadcopter

Lumenier

  • $74.99
  • & FREE Two-Day Shipping


  • Full 3K Carbon Fiber airframe featuring a solid 3mm thick "Unibody" main plate

  • Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns)

  • "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250

  • Flight controller cover plate includes cutouts for SMA connector and video transmitter as well as a holder for the included XT-60 Lipo pig-tail

  • Included Lumenier 4Power power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. The PDB can optionally be outfitted with a Pololu 12v or 5v voltage step-down (Pololu board not included)

 

Features

  • Full 3K Carbon Fiber airframe featuring a solid 3mm thick "Unibody" main plate.
  • Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
  • "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
  • Flight controller cover plate includes cutouts for SMA connector and video transmitter as well as a holder for the included XT-60 Lipo pig-tail.
  • Included Lumenier 4Power power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. The PDB can optionally be outfitted with a Pololu 12v or 5v voltage step-down (Pololu board not included).
  • Easy Lipo Access (suggested Lipo is a 1300mah 3 or 4s)
  • Support for 32mm board cams as well as 26mm cams in cases such as the Lumenier CM-650.
  • Support to carry HD camera (such as the GoPro 4, Mobius, or GoPro Session) with optional camera vibration mount (not included)
  • Included Landing Gear

 

The airframe is designed to support both 3s or 4s lipo setups and can comfortably carry 1000mah and 1300mah lipos

 

Weight

  • Airframe: 91g (with PDB and hardware), 96g with included Landing Gear.
  • AUW: The QAV210 is flown with an AUW of 256-281g depending on motor choice (includes all flight electronics and FPV gear, but without Lipo or HD camera).

 

Includes

  • 1x QAV210 CHARPU carbon fiber airframe, board camera mount, 26mm camera mount, and hardware (including 35mm frame spacers)
  • 1x Lumenier 4Power Power distribution board + set of 6mm stand offs
  • 1x XT-60 Pig-Tail and silicone grommet
  • 1x set of 10mm aluminum landing gear and vinyl feet
  • 4" Anti-Vibration neoprene tape
  • 1x Lumenier lipo strap